The TTI60 injector dual flat jet nozzle produces extremely coarse droplets and combines maximum drift reduction with the twin effects of higher coverage and increased penetration of dense stands. The one-piece, short nozzle / Quick TeeJet cap with large, round air and fluid free cross-sections provides a high level of operational safety and wear resistance.
ADVANTAGES AND CHARACTERISTICS:
TTI60 with injector double flat jet in discharge angles of 30 ° each to the front and rear for optimum attachment
110° spray angle of the double jet for uniform lateral distribution
One-piece nozzle / Quick TeeJet cap with automatic alignment of the spray jets
Extremely coarse drops increase the drift reduction
Volume fraction of drippable fine droplets is less than 1.5%*
Material POM / acetal for a very good chemical resistance and high wear resistance
If required, injector can be removed from defined fixation
Pressure range 1.5 to 7 bar, optimally 4 to 6 bar
* -04er nozzle with water at 2.8 bar. Driftable fine drops are smaller than 150μm.
